Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices

Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices
Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices
Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices
Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices
Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices
Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices
Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices

Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices

Aruba AP-203RP (US) Flex-radio 802.11ac 2x2 PoE Unified Remote AP and Internal Antennas. This compact, cost-effective remote access point is software configurable to operate in either 1x1 dual radio mode, or 2x2 single radio mode. Managed by the Aruba Mobility Controller, the 203R supports centralized configuration, data encryption, policy enforcement and network services. It extends corporate resources to remote locations by establishing site-to-site VPN tunnels to the data center. It offers a variety of enterprise-class features which gives remote workers the same high-quality Wi-Fi experience they get at corporate headquarters.

Unified flexible radio 802.11ac remote AP with internal antennas. Supports wall-box and desk mount deployments.

AP type: Indoor, flex radio. 5GHz 802.11ac 2x2 MIMO OR 2.4GHz 802.11n 2x2 MIMO. 5GHz 802.11ac 1x1 AND 2.4GHz 802.11n 1x11.

Software-configurable radio supports 5GHz (Radio 0) and/or 2.4GHz (Radio 1). 5GHz: Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2x2 VHT80 client devices. 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400Mbps wireless data rate to individual 2x2 VHT40 client devices (300Mbps for HT40 802.11n client devices). Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio.

Supported frequency bands (country-specific restrictions apply). 2.400 to 2.4835GHz. 5.150 to 5.250GHz. 5.250 to 5.350GHz.

5.470 to 5.725GHz. 5.725 to 5.850GHz. Available channels: Dependent on configured regulatory domain. Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.

802.11b: Direct-sequence spread-spectrum (DSSS). 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM).

802.11b: BPSK, QPSK, CCK. 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM. Transmit power: Configurable in increments of 0.5 dBm.

Maximum (conducted) transmit power (limited by local regulatory requirements). 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2x2 mode). 5GHz band: +18 dBm per chain, +21 dBm aggregate (2x2 mode).

Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain. Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks. Maximum ratio combining (MRC) for improved receiver performance. Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance.

Short guard interval for 20MHz, 40MHz and 80MHz channels. Space-time block coding (STBC) for increased range and improved reception. Low-density parity check (LDPC) for high-efficiency error correction and increased throughput. Transmit beam-forming (TxBF) for increased signal reliability and range.

802.11b: 1, 2, 5.5, 11. 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54. 802.11n: 6.5 to 300 (MCS0 to MCS15). 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80). 802.11n high-throughput (HT) support: HT 20/40. 802.11ac very high throughput (VHT) support: VHT 20/40/80. 802.11n/ac packet aggregation: A-MPDU, A-MSDU. Two integrated dual-band omni-directional antennas for 2x2 MIMO with maximum individual antenna gain of 0.7dBi in 2.4GHz and 1.0dBi in 5GHz. Built-in antennas are optimized for vertical orientation of the AP. Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is -0.4dBi in 2.4GHz and 0.5dBi in 5GHz. Uplink: 10/100/1000BASE-T Ethernet (RJ-45, back). Auto-sensing link speed and MDI/MDX. 802.3az Energy Efficient Ethernet (EEE). Local: Two 10/100/1000BASE-T Ethernet (RJ-45, back). One port (E2): PoE-PSE (output): 48 Vdc (nominal) 802.3af PoE (AP-203RP models). Bluetooth Low Energy (BLE) radio.

Up to 4dBm transmit power (class 2) and -93dBm receive sensitivity. Integrated antenna with moderately directional pattern and peak gain of 1dBi. USB 2.0 host interface (Type A connector, top). Capable of supplying up to 1A/5 watts of power to an attached device. AC power interface, 2 prong IEC 60320-1 C8 receptacle (back).

Local network port status (2x). Includes PoE-PSE status (AP-203RP models).

Reset/LED control button (paperclip access, bottom). Factory reset (when activated during device power up). Serial console interface (custom, uUSB physical jack, bottom).

256-QAM modulation (802.11ac) supported by the 2.4GHz radio as well. Maximum IPsec encrypted wired throughput: 20Mbps. The AP supports direct AC power: 90V 265V, 47Hz 63Hz. Note that the unit does not include an AC power cord (IEC C7 plug).

A compatible region-specific cord should be selected and added when ordering the AP. Maximum (worst-case) power consumption: 7.5W. Excludes power consumed by external USB and/or PoE-PD device (and internal losses); this could add up to 6W for a 5W/1A USB device and up to 18W for a max load (15.4W) 802.3af PoE-PD device.

Maximum (worst-case) power consumption in idle mode: 4.6W. The AP supports desk mount without additional accessories. A cover ships with the AP to hide connectors, cables and product labels. The cover can be used to support wall mounted deployments as well. Dimensions/weight (unit, with cable cover).

155mm (W) x 50mm (D) x 95mm (H). 224mm (W) x 159mm (D) x 78mm (H).

Temperature: 0° C to +40° C (+32° F to +104° F). Humidity: 5% to 93% non-condensing. Temperature: -40° C to +70° C (-40° F to +158° F). EN 60601-1-1 and EN 60601-1-2. For more country-specific regulatory information and approvals, please see your Aruba representative.

MTBF at +25C° operating temperature. AP-203R: 324,000 hours (37 years). AP-203RP: 308,000 hours (35 years). Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac. ArubaOS 6.5.2.0/8.2.0.0.

Aruba InstantOS 6.5.2.0/8.2.0.0. The item "Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices" is in sale since Friday, February 1, 2019.

This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Access Points". The seller is "flyoversurplus" and is located in Sedalia, Missouri.

This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Croatia, Brazil, Chile, Colombia, Viet nam.
Aruba 203R Series Remote Access Point 802.11ac for Home & Small Branch Offices